Process 2:1 False car-Wuxi Rigid Machinery Co., Ltd.

① Diverter Pulley
2:1. Process standard configuration; Configured with telescopic rods for easy suspension outside the shaft.
②Canopy
Effectively preventing high-altitude falling objects, high-strength steeltelescopic roof.
③High speed climber
LTD100-10P18 electric control integrated climber, with a speed of 18m/min; connected to the false car platform mounting bracket through a dedicated adapter;
④Overspeed safety lock
OSL512 overspeed safety lock with a rated load of 1,600kg;
The platform will automatically lock when it descends more than 30m/min;
Apply Ф 11.5 high strength steel wire rope.
⑤Wire rope and rope retraction device
For climbers Ф 10.2 steel wire rope and its winding device;
The length of the steel wire rope should be configured to at least twice of the shaft height.
⑥Work Platform

DBG spacing (mm)	Extension distance (mm)
1500-2100	1440-2040
2100-2700	2040-2640

Bidirectional adjustment within the gauge range as needed;
Aluminum protective railings should be installed around the platform;
The bottom plate is made of wood, and the thickness should not be less than 18mm;
The steel support frame and platform can bear 1,000kg.
⑦Anti-derailment protection system
The climber control box is equipped with an anti-derailment switch socket.
The anti- derailment switch component should be connected to the climber and installed on the platform to support the guide rail laterally.
⑧Safety tong assembly
When the steel wire rope of the climber is released, it will automatically lock the platform, which is the second line of fall protection for the platform.
⑨Heavy hammer
Maintaining the safety lock wire rope vertically suspended.
⑩Diverter counter weight
Maintaining the climber and hanging the steel wire rope vertically;
Maintaining the steel wire rope not be entangled under 2:1 process mode.